温度对亚热带地区常见树种叶片甲烷排放的影响

以亚热带常见树种米槠、木荷、浙江桂、罗浮栲、杉木和柑橘为对象,利用控制试验研究了温度对树木叶片甲烷(CH4)排放的影响.结果表明:当温度在10℃时,供试的6种树木中,仅木荷、柑橘和罗浮栲的叶片排放CH4;温度高于20℃时,所有树木叶片均可排放CH4.温度高于30℃时,叶片排放CH4的平均排放速率(1.010ngCH4·g-1DM·h-1)是10～30℃时平均排放速率(0.255ngCH4·g-1DM·h-1)的3.96倍.增温对柑橘和杉木CH4排放速率的影响显著高于其他4种树木.培养时间对叶片排放CH4速率有显著影响,温度胁迫对树木排放CH4的影响受植物活性的控制.在低温或高温条件下,树木干叶均不能排放CH4.高温胁迫对树木叶片排放CH4有重要影响,全球变暖可能增加植物的CH4排放.     

毛竹茎秆叶绿体超微结构及其发射荧光光谱特征

为了探讨毛竹（Phyllostachys pubescens）茎秆的光合特性,以1龄和3龄毛竹为材料,观察了茎秆和叶中叶绿体的超微结构,测定了光合色素含量以及发射荧光光谱。结果表明：茎秆中叶绿体发育完整,其类囊体垛叠程度高于叶,并含有淀粉粒。茎秆中叶绿素总含量、类胡萝卜素及Chla／b含量显著低于叶（FI〈O．05）。茎秆发射荧光光谱在735nm处没有明显的主峰,1龄和3龄毛竹茎秆光系统lI与光系统I的半峰宽比值分别比叶降低了7．0％和11．3％（P〈0．05）,峰高比值比叶分别增加了6．5％和18．3％（P〈0．05）。四阶导数光谱在650—800nm波长范围内出现了6个极大值,代表LHCII、CP43、CP47、RCI和ILHCI的发射荧光峰以及PSI和PSII的发射荧光副振峰：其中,茎秆中RCI和LHCI特征发射荧光峰与叶相比有不同程度的红移。表明毛竹茎秆叶绿体通过提高Chlb的相对含量和增加类囊体垛叠以及降低LHCI含量,来适应毛竹茎秆以红光为主的光环境。进而协调激发能在2个光系统间的分配。     

Recent progresses in gene delivery-based bone tissue engineering

Gene therapy has converged with bone engineering over the past decade, by which a variety of therapeutic genes have been delivered to stimulate bone repair. These genes can be administered via in vivo or ex vivo approach using either viral or nonviral vectors. This article reviews the fundamental aspects and recent progresses in the gene therapy-based bone engineering, with emphasis on the new genes, viral vectors and gene delivery approaches.     

Multifaceted applications of nanomaterials in cell engineering and therapy

Nanomaterials with superior physiochemical properties have been rapidly developed and integrated in every aspect of cell engineering and therapy for translating their great promise to clinical success. Here we demonstrate the multifaceted roles played by innovatively-designed nanomaterials in addressing key challenges in cell engineering and therapy such as cell isolation from heterogeneous cell population, cell instruction in vitro to enable desired functionalities, and targeted cell delivery to therapeutic sites for prompting tissue repair. The emerging trends in this interdisciplinary and dynamic field are also highlighted, where the nanomaterial-engineered cells constitute the basis for establishing in vitro disease model; and nanomaterial-based in situ cell engineering are accomplished directly within the native tissue in vivo. We will witness the increasing importance of nanomaterials in revolutionizing the concept and toolset of cell engineering and therapy which will enrich our scientific understanding of diseases and ultimately fulfill the therapeutic demand in clinical medicine.     

Performances de la scintigraphie parathyroïdienne au 99mTc-Sestamibi dans l’hyperparathyroïdie secondaire (à propos de 20 cas)

Aim of the studyTo evaluate the performance of the ^99mTc-Sestamibi parathyroid scintigraphy and to compare it with the performance of cervical ultrasonography in patients with secondary hyperparathyroidism who are candidates for parathyroidectomy.Patients and methodsWe performed a retrospective study including 20 patients with severe secondary hyperparathyroidism who underwent parathyroid scintigraphy in the nuclear medicine department of Sfax, during the period between January 2009 and June 2012. Our two days protocol included dual-phase, MIBI/Tc subtraction and single photon emission photons (SPECT) techniques. We analyzed the results obtained from each technique alone, then from combinations thereof. For all patients, we have collected the surgical and histopathological data as well cervical ultrasound if available.ResultsThe subtraction technique was the best performing with a sensitivity of 47% and an accuracy of 55%. The combination of subtraction scintigraphy and SPECT has improved the sensitivity to 53%and accuracy to 57%. The combined lecture of ultrasound and scintigraphy has given the best performance with a sensitivity of 58%, a specificity of 83% and an accuracy of 66%.ConclusionParathyroid scintigraphy combining subtraction and SPECT showed better reliability. The coupling with ultrasound is essential to improve results. The poor performance of scintigraphy in secondary hyperparathyroidism implies that it should be required only to search for ectopic or supernumerary glands.     

城市森林碳汇及其抵消能源碳排放效果——以广州为例

城市森林及其管理相关政策作为减少CO₂排放的有效策略得到了较为广泛的关注。采用材积源生物量方程与净初级生产力方法来定量分析了广州市城市森林碳储量和碳固定量,根据化石能源使用量及其碳排放因子核算了广州城市能源碳排放,最后评估了城市森林碳抵消效果。结果显示广州市城市森林碳储量为654.42×10⁴t,平均碳密度为28.81 t/hm²,而森林碳固定量为658732 t/a,平均固碳率为2.90 t·hm^-2·a^-1。2005-2010年广州市年均能源碳排放则达到2907.41×10⁴t。广州城市森林碳储量约为城市年均能源碳排放的22.51%,其通过碳固定年均能够抵消年均碳排放的2.27%,不过从城市森林综合效益来看其仍是城市低碳发展重要举措之一。分析了林型组成和林龄结构对于广州森林碳储量和碳固定量的影响,并从森林管理角度为城市森林碳汇提升提出建议。这些结果和讨论有助于评估城市森林碳汇在抵消碳排放中所起的效果。     

碳汇目标下农户森林经营最优决策及碳汇供给能力——基于浙江和江西两省调查

增加森林碳汇已成为应对气候变化的重要举措.基于浙江和江西两省农户调研数据,以杉木为案例树种,引用生长模型、修正的Faustmann模型碳密度和价格数据,对单一和碳汇木材复合经营目标下的杉木最佳轮伐期和林地期望值进行比较研究,并模拟了不同碳价格和利率水平下的变化,同时绘制了农户的碳汇供给曲线.可以发现,在碳汇林经营模式下,基于目前的杉木市场价格远高于碳价格的现实,农户的经营采伐决策并不会发生明显改变,从而导致在大范围的碳价格变动下碳汇的供给也没有显著增加,这也说明木材收益和碳收益的两个不同经营目标是协调的.同时,基于碳汇经营模式下的杉木林地期望值增长迅速,碳汇林地潜在投资价值巨大,也意味着森林碳汇对于土地利用改变可能会产生巨大影响.     

Development of a Model For Estimating the Size and Dynamics of the Pet Dog Population

Abstract

A conceptual model was developed to describe the dynamics of the pet dog population. The model synthesizes existing data collected for a variety of purposes to estimate the size of the various components of the pet dog population in Washington and Iowa during 1991. The total population mortality rate was estimated as 12.4% per year. Animal shelters in Washington and Iowa handled 7.6% and euthanized 4.0% of the dog population in those two states. When these estimates were extrapolated to the entire U.S. dog population, the model predicted that the total annual turnover in owned dogs was 14.7%, or 7.71 million dogs, that 4 million dogs were handled by animal shelters, and that 2.1 million were euthanized. It was also estimated that 79% of all female dogs were spayed, that household breeding could be attributed to less than one-fifth (18.7%) of the female dogs in the reproductive pool, and that the number of owners contributing to total dog population turnover through failure to retain their dog (103,453) was approximately three times the number of owners who allowed their female dogs to be bred (32,513).     

Monte-Carlo Simulations of Centrifugal Gas Separation

The use of a Monte–Carlo formalism in a centrifugal gas process separation simulation provides an efficient predictor of dew-pointing as a function of the imposed radial pressure gradient. Previously, this was done by simply calculating radial pressure and then resorting to a separate equation of state routine for evaluating whether condensation will occur or not. In our model, we incorporate the potential energy associated with rotation of a gas element into the simulation along with molecular interaction terms. This enables us to predict when sufficient nucleation has occurred that condensed material forms—an important limit for stable operation of a gas centrifuge.     

An ultrathin carbon nanoribbon study as a component of nanoelectromechanical devices

We investigated a carbon nanoribbon (CNR) using atomistic simulations based on Tersoff–Brenner potential function. The CNR was obtained from a compressed (5,5) carbon nanotube (CNT). The obtained CNR had a cross-sectional view as a binocular telescope structure composed of both sp² and sp³ bonds. One carbon atom per ten carbon atoms had sp³ bond. For the optimized structures, the residual forces on the CNR were 3-order higher than that on the CNR and the lattice constant of the CNR was higher 0.0624?Å than that of the CNT along the tube axis. The Young's modulus of the CNR was the same as that of the CNT whereas the critical strain of the CNR was significantly lower than that of the CNT because the residual stresses on the CNR was very higher than those on the CNT. The tensile force curve vs. the strain of the CNT was slightly higher than that of the CNR.